Dimensions - Rods

For sectional rods and bars (square, hexagonal or flat), max. dimensions depend on the type or group of the aluminium alloys.

Round Rods
Extruded	DIN	ASTM	EN
• Indirect extrusion
d=20-127mm	1799	B221	755/3
• Direct extrusion
d=20–180mm	1799	B221	755/3
Drawn
d=7-76,20mm	1798	B211	754/3
Standard production length: 2-6 m (depending on the dimension or alloy) or in agreement with the customer. Minimum drawing dimensions for 6xxx and 2011alloys: 4,76 mm

Hexagonal Rods and Bars
Extruded	DIN	ASTM	EN
• Indirect extrusion
s=20-90mm	59701	B221	755/6
• Direct extrusion
a=20-115mm	59701	B221	755/6
Drawn
s=7-60mm	1798	B211	754/6
Standard production length: 2-6 m (depending on the dimension or alloy) or in agreement with the customer. Minimum drawing dimensions for 6xxx and 2011alloys: 4.76 mm

Square Rods and Bars
Extruded	DIN	ASTM	EN
• Indirect extrusion
a=20-90	59700	B221	755/4
• Direct extrusion
a=20-115	59701	B221	755/4
a=20-140*	59700	B221	755/4
*only alloys 2011 and 6082
Drawn
s=7-60mm	1798	B211	754/6
Standard production length: 2-6 m (dependent on the dimension or alloy) or in agreement with the customer. Minimum drawing dimensions for 6xxx and 2011alloys: 4.76 mm

Ploščate palice
Extruded	DIN	ASTM	EN
• Indirect extrusion
h = 10 - 50 w = 20 – 100	1770	B221	755/5
• Direct extrusion
h = 10 - 100 w = 20 - 113	59701	B221	755/4
h = min.10–100* w = 20-140	1770	B221	755/4
*only alloys 2011 and 6082
Drawn
h: 10,0 - 38,10 w = 12,70-76,20	1798	B211	754/6
Standard production length: 2-6 m (dependent on the dimension or alloy) or in agreement with the customer. The maximum height and width of extruded flat rods is conditioned by the circumscribed diameter - max. 160 mm.